# BCM94704mpcb board # Copyright 2007, Broadcom Corporation # All Rights Reserved. # # This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation; # the contents of this file may not be disclosed to third parties, copied # or duplicated in any form, in whole or in part, without the prior # written permission of Broadcom Corporation. # $Id: bcm94704mpcb-sdr.txt,v 1.1.1.1 2008/07/21 09:20:53 james26_jang Exp $ boardtype=0x0472 boardnum=${serno} # Board revision 2.2 boardrev=0x22 # BCM5325 RoboSwitch requires reverse MII initialization boardflags=0x10 # MIPS clock frequency in MHz clkfreq=264 # 64 MB SDR SDRAM (16 Meg x 16 x 2) sdram_init=0x0008 sdram_config=0x0032 sdram_refresh=0x0000 sdram_ncdl=0 # BCM5325F et0macaddr=00:90:4c:a0:${maclo} et0phyaddr=30 et0mdcport=0 # BCM5325F Wan port et1macaddr=00:90:4c:a1:${maclo} et1phyaddr=4 et1mdcport=0 # BCM5325F reset gpio0=robo_reset # Bootloader variables lan_ipaddr=192.168.1.1 lan_netmask=255.255.255.0 boot_wait=on # Watchdog timer in ms watchdog=3000 # Reset reset_gpio=7