# Broadcom 4705L reference design
# Copyright 2007, Broadcom Corporation
# All Rights Reserved.
# 
# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
# $Id: bcm94705lmp.txt,v 1.1.1.1 2008/07/21 09:20:53 james26_jang Exp $

boardtype=0x489
boardnum=${serno}
# Board revision 1.0
boardrev=0x10
# BFL_ENETROBO, BFL_ENETVLAN
boardflags=0x110

# MIPS clock frequency in MHz
clkfreq=300,150,37

# 64 MB DDR SDRAM (16 Meg x 16 x 2)
sdram_init=0x0009
sdram_config=0x0062
sdram_refresh=0x0000
sdram_ncdl=0

# Ethernet 
et0macaddr=00:90:4c:b9:${maclo}
et0phyaddr=30
et0mdcport=0

# Watchdog timer in ms
watchdog=3000

# Reset 
reset_gpio=7

# SES Button on GPIO 8
gpio8=ses_button

# Variables used by CFE and run-time OS image
# which may be modified by the run-time OS image
lan_ipaddr=192.168.1.1
lan_netmask=255.255.255.0

# Ethernet switch config (vlan1:LAN, vlan2:WAN)
vlan1ports=0 1 2 3 8*
vlan1hwname=et0
vlan2ports=4 8u

# bootloader/OS glue
landevs=vlan1 wl0 wl1
wandevs=et0
lan_ipaddr=192.168.1.1
lan_netmask=255.255.255.0

# CFE variables
boot_wait=on
wait_time=5