# bcm94712agsdio board # Copyright 2007, Broadcom Corporation # All Rights Reserved. # # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS # FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. # $Id: bcm94712agsdio.txt,v 1.1.1.1 2008/07/21 09:20:53 james26_jang Exp $ boardtype=0x047b boardnum=${serno} # Board revision 1.2 boardrev=0x12 boardflags=0x0a08 sromrev=2 # MIPS clock frequency in MHz clkfreq=200 # 64 MB DDR SDRAM (4 Meg x 16 x 2) sdram_init=0x0009 sdram_config=0x0062 sdram_refresh=0x0000 sdram_ncdl=0 # Ethernet Phy et0macaddr=00:90:4c:a7:${maclo} et0phyaddr=01 et0mdcport=0 # No eth1 et1phyaddr=0x1f # Make the d11 i/f dual band wl0id=0x4319 # 4712 802.11g parameters il0macaddr=00:90:4c:a8:${maclo} aa0=3 ag0=2 pa0maxpwr=74 pa0itssit=62 pa0b0=0x1691 pa0b1=0xfa77 pa0b2=0xfe8a # 4320 802.11a parameters et1macaddr=00:90:4c:a9:${maclo} aa1=2 ag1=2 pa1itssit=120 pa1lomaxpwr=60 pa1lob0=0x1825 pa1lob1=0xfcf2 pa1lob2=0xff65 pa1maxpwr=60 pa1b0=0x1b49 pa1b1=0xfcb1 pa1b2=0xff9e pa1himaxpwr=60 pa1hib0=0x1a8f pa1hib1=0xfcb7 pa1hib2=0xff89 # Commons wireless parameters cctl=0 ccode=0 # Bootlaoder variables boot_wait=on reset_gpio=7 # Watchdog timer in ms watchdog=3000